501-12-3 Instrument Panel and Console 501-12-3
REMOVAL AND INSTALLATION (CONTINUED)
E902 EN 07/2001 2002 Bantam
6. Remove the A-pillar trim panels.
1. Unclip the trim panel.
2. Slide the trim panel upwards.
7. Remove the instrument cluster. For
additional information,
refer to Section 413-
01.
8. Detach the central junction box.
1. Remove the cover.
2. Remove the central junction box screws.
9. Remove the instrument panel side trim
panels (left-hand side shown, right-hand
side similar).
10. Detach the wiring harness.
To Next Page
Loading...
