501-12-4 Instrument Panel 501-12-4
REMOVAL AND INSTALLATION (CONTINUED)
E902 EN 07/2001 2002 Bantam
11. NOTE: Fold the floor covering back to reveal
the instrument panel lower bolts.
Remove the instrument panel left-hand side
retaining bolts.
12. Remove the instrument panel right-hand
side retaining bolts.
13. Remove the instrument panel upper
retaining bolts.
14. Detach the electrical connector.
15. Remove the passenger air bag module.
For additional information,
refer to Section
501-20B.
To Next Page
Loading...
