501-14-20 Handles, Locks, Latches and Entry Systems 501-14-20
DISASSEMBLY AND ASSEMBLY (CONTINUED)
E6385 EN 08/2001 2002 Bantam
4. NOTE: Cover the roller with lock barrel
grease.
Insert the roller into the cutout slot in the
side of the tumbler magazine.
5. NOTE: Make sure the roller locates into the
corresponding slot in the lock housing.
Insert the tumbler magazine into the lock
housing.
6. NOTE: Keep the lock assembly in its current
position.
Insert the relevant key to make sure that
the barrel operates correctly.
7. Fit the self-locking retainer ensuring that all
of the tangs are locked into position.
To Next Page
Loading...
