501-16-9 Wipers and Washers 501-16-9
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
A10: CHECK THE WIND HIELD WIPER OTOR FOR PROPER FUNCTION S M
1.
2.
Windshield wiper
motor C47
3.
4 Turn the multifunction switch to the LOW
WIPER SPEED position.
5 Measure the voltage between windshield wiper
motor, connector C47, pin 4, circuit 14S-AK10
(VT/BK), harness side and ground.
• Is battery voltage indicated?
Yes
CHECK the windshield wiper motor. If
necessary INSTALL a new one. TEST the
system for normal operation.
No
GO TO A11
A11: CHECK THE MULTIFUNCTION SWITCH FOR PROPER FUNCTION
1.
2.
Windshield wiper
motor C47
3.
Multifunction
switch C15b
4.
E9432 EN 07/2001 2002 Bantam
To Next Page
Loading...
