501-20B-15 Occupant Restraints — Passive — Supplemental Air 501-20B-15
Bag System
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
D3: CHECK THE AIR BA WARNING INDICATOR FUNCTION G
1.
Instrument Cluster
C37
2 Install a fused (15A) jumper wire between the
air bag control module C334 pin 4, circuit 91S-
JA14 (BK/GN) harness side and ground.
3.
• Is the air bag warning indicator illuminated?
Yes
INSTALL a new automatic detach
circuit/instrument cluster printed circuit.
REPEAT the self-test; CLEAR the DTCs.
REACTIVATE the system. REFER to Air
Bag and Safety Belt Pretensioner
Supplemental Restraint System (SRS) in
this section.
No
GO TO D4
08/2001 2002 Bantam
To Next Page
Loading...
