501-20B-62 Occupant Restraints — Passive — Supplemental Air 501-20B-62
Bag System
GENERAL PROCEDURES
Deployed Air Bag Disposal
WARNING: After deployment, the air bag
module surface may contain deposits of
sodium hydroxide, a product of the gas
generate combustion, which is irritating
to the skin. Use protective gloves when
handling any deployed air bag module.
Failure to follow this instruction may re-
sult in personal injury.
1. Remove the deployed air bag module(s).
For additional information,
refer to the relevant procedure in this section.
2. Seal the deployed air bag module(s) in the
packaging from the new air bag module(s)
or a suitable polythene bag, and then
dispose of in accordance with local
contaminated waste regulations.
08/2001 2002 Bantam
To Next Page
Loading...
