211-02-49 Power Steering 211-02-49
REMOVAL AND INSTALLATION (CONTINUED)
13.
CAUTION: There is a limited amount
of space available to tilt the engine.
Do not overstress or damage any
pipes or cables.
Tilt the engine forwards.
14. Detach the power steering pipes from the
retaining bracket.
15. Disconnect the fluid cooler to steering gear
pipes.
16. Support the crossmember assembly using
a suitable jack.
17. Remove the crossmember assembly
retaining bolts (jack not shown for clarity).
E6320 EN 07/2001 2002 Bantam
To Next Page
Loading...
