211-02-50 Power Steering 211-02-50
REMOVAL AND INSTALLATION (CONTINUED)
18. Lower the crossmember assembly enough
to allow removal of the steering gear.
19. Remove the pinion shaft body seal.
20. Remove the steering gear retaining nuts
and bolts.
21.
CAUTION: There is a very limited
amount of space in which to remove
the steering gear. Do not overstress
or damage the power steering pipes.
Remove the steering gear.
1. Ease the steering gear to the right.
2. Ease the steering gear out towards the
rear.
E6320 EN 07/2001 2002 Bantam
To Next Page
Loading...
