211-02-51 Power Steering 211-02-51
REMOVAL AND INSTALLATION (CONTINUED)
22. Disconnect the power steering pipes.
Installation
1. NOTE: If the steering gear is being renewed
the unions that are supplied fitted to the
steering gear should be removed and
retained for future use.
Renew the union sealing rings.
1. Push the sealing ring onto the tool.
2. Locate the tool on the union and push on
the sealing ring.
2. Refit the components in the reverse order.
E6320 EN 07/2001 2002 Bantam
To Next Page
Loading...
