211-02-77 Power Steering 211-02-77
REMOVAL AND INSTALLATION (CONTINUED)
12. Remove the flexible pipe support.
15. NOTE: Make sure the washer is fitted
between the gearshift stabilizer and
transmission.
Install the shift rod and gearshift stabilizer.
1. Connect the gearshift stabilizer.
2. Connect the shift rod.
All Vehicles
16. Install the power steering fluid cooler to
power steering gear return line to the
accessory drive belt lower guard.
17. Secure the accessory drive belt lower
guard.
18. NOTE: Before lowering the vehicle make
sure the road wheels are in the straight
ahead position.
Lower the vehicle.
E5862 EN 07/2001 2002 Bantam
To Next Page
Loading...
