Pinpoint Tests
PINPOINT TEST A: THE IGNITION SWITCH IS INOPERATIVE
CONDITIONS
DETAILS/RESULTS/ACTIONS
A1: CHECK THE IGNITION SWITCH CONNECTOR
1 Remove the steering column shrouds and
check the ignition switch connector.
• Is the ignition switch connector clean and
secure?
Yes
GO TO A2
No
CLEAN and SECURE the ignition switch
connector as required. TEST the system for
normal operation.
E1227 EN 07/2001 2002 Bantam
211-05-98B Steering Column Switches 211-05-98B
To Next Page
Loading...
