Pinpoint Tests
PINPOINT TEST A: THE IGNITION SWITCH IS INOPERATIVE
A1:
CHECK THE IGNITION SWITCH CONNECTOR .......................................... 211-05-98B
A2: CHECK FUSE 40 (60A)................................................................................. 211-05-99
A3: CHECK CIRCUIT 30 RD) FOR SHORT TO GROUND .................................. 211-05-99
A4: CHECK FOR OPEN ON CIRCUIT 30 (RD).................................................... 211-05-99/100
A5: CHECK THE IGNITION SWITCH.................................................................. 211-05-100
PINPOINT TEST B: NO POWER IN ACC
B1: CHECK FOR OPEN /SHORT TO GROUND ON CIRCUIT 75 (YE) ............... 211-05-100
PINPOINT TEST C: NO POWER IN RUN
C1: CHECK FUSE 38 (60A) ................................................................................ 211-05-101
C2: CHECK FOR SHORT TO GROUND ON CIRCUIT 30 (RD)........................... 211-05-101
C3: CHECK THE IGNITION SWITCH.................................................................. 211-05-101
C4: CHECK FOR OPEN ON CIRCUITS 15 (GN) AND 15 (GN/BU) ..................... 211-05-102
C5: CHECK THE IGNITION RELAY GROUND.................................................... 211-05-102
C6: CHECK THE IGNITION RELAY POWER FEED............................................ 211-05-102/103
C7: CHECK FOR OPEN ON CIRCUIT 15 (GN) ................................................... 211-05-103
PINPOINT TEST D: NO POWER IN START
D1: CHECK FUSE 36 (60A) ................................................................................ 211-05-103/104
D2: CHECK FOR SHORT TO GROUND ON CIRCUIT 30 (RD)........................... 211-05-104
D3: CHECK THE IGNITION SWITCH.................................................................. 211-05-104
D4: CHECK FOR SHORT/OPEN ON CIRCUIT 50 (GY) ...................................... 211-05-104/105
D5: CHECK THE START INHIBIT RELAY GROUND........................................... 211-05-105
D6: CHECK THE START INHIBIT RELAY POWER FEED .................................. 211-05-105
D7: CHECK FOR OPEN ON CIRCUIT 50 (GY/BK).............................................. 211-05-106
PINPOINT TEST E: THE MULTIFUNCTION SWITCH/HAZARD WARNING
SWITCH DOES NOT OPERATE CORRECTLY
E1: CHECK THE EXTERIOR LIGHTING ............................................................. 211-05-106
E2: CHECK THE WIPER AND WASHER............................................................ 211-05-106
To Next Page
Loading...
