303-01B-44 Engine — 1.6L / 1.3L RoCam 303-01B-44
IN-VEHICLE REPAIR (CONTINUED)
E6634 EN 07/2001 2002 Bantam
4. Remove the crankshaft pulley.
5. Using the special tool, remove the oil seal.
(Shown with the oil pan removed).
Installation
1. NOTE:
The pulley, installation sleeve,
housing and sealing lip must be free of oil.
NOTE:
The new oil seal is supplied with a
plastic installation sleeve.
Install the oil seal to the crankshaft pulley.
1. Place the installation sleeve on the
crankshaft pulley.
2. Carefully install the oil seal on the
crankshaft pulley.
• Remove the installation sleeve.
2. Using the special tool, install the crankshaft
pulley.
1. Crankshaft pulley bolt.
2. Special tool.
3. Crankshaft pulley.
4. New oil seal.
To Next Page
Loading...
