303-01B-47 Engine — 1.6L / 1.3L RoCam 303-01B-47
IN-VEHICLE REPAIR (CONTINUED)
E6635 EN 07/2001 2002 Bantam
6. Install the special tool and high-pressure
airline.
• Connect an air supply, pressurized to 7-
10 bar.
7. NOTE:
To aid correct reassembly, keep all
parts in the order removed.
Using special tools, remove the valve
spring.
1. Compress the valve spring.
2. Remove the valve collets, the valve
spring retainer and the valve spring.
8. Using the special tool, remove the valve
seals.
Installation
1. NOTE:
The valve seals are fully installed by
the pressure of the valve springs.
Using the special tool, install the valve
seals.
To Next Page
Loading...
