303-01B-48 Engine — 1.6L / 1.3L RoCam 303-01B-48
IN-VEHICLE REPAIR (CONTINUED)
E6635 EN 07/2001 2002 Bantam
2. Using the special tools, install the valve
springs.
1. Compress the valve spring and valve
spring retainer.
2. Insert the valve collets.
3. Remove the high-pressure airline and
special tool.
4. Remove the camshaft. For additional
information, refer to Camshaft in this
s
ection.
5. Install the roller finger cam followers.
(Cylinder head shown removed).
6. Install the camshaft. For additional
information, refer to Camshaft in this
s
ection.
7. Install the spark plugs.
8. Install the valve cover. For additional
information, refer to Valve Cover in this
s
ection.
To Next Page
Loading...
