303-01B-86 Engine — 1.6L / 1.3L RoCam 303-01B-86
REMOVAL (CONTINUED)
E6642 EN 07/2001 2002 Bantam
38. Remove the engine front mounting bracket.
39. Move the assembly stand forward with the
engine and transaxle assembly.
40. Install an engine lifting eye.
41. Disconnect the engine wiring harness
electrical connectors.
1. Remove the generator electrical
connectors.
2. Remove the oil pressure switch
3. Remove the (CKP)- sensor
42. Remove the starter motor and the transaxle
left-hand flange bolt.
To Next Page
Loading...
