303-01B-98 Engine — 1.6L / 1.3L RoCam 303-01B-98
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E6644 EN 07/2001 2002 Bantam
3. Remove the coolant flow control housing.
4. Remove the engine mounting bracket.
5. Remove the camshaft bearing caps and the
camshaft.
• Slacken each bolt of the camshaft
bearing caps by one turn until the
camshaft is released.
1. Remove the camshaft bearings caps.
2. Remove the camshaft.
6. NOTE:
Keep all parts in order for reassembly.
Remove the roller finger cam followers.
To Next Page
Loading...
