303-01B-107 Engine — 1.6L / 1.3L RoCam 303-01B-107
ASSEMBLY (CONTINUED)
E6645 EN 07/2001 2002 Bantam
12. Install the chain guide, the chain tensioner
arm, and the crankshaft timing sprocket.
13. NOTE:
The mark on the crankshaft timing
sprocket and the single colored link of the
timing chain must line up.
Install the timing chain.
14. NOTE:
Use a new oil pump.
NOTE:
Use a new gasket.
NOTE: The oil pump sealing flange must be
within ±0.20 mm of cylinder block bottom
sealing flanges.
Install the oil pump.
15. NOTE:
The pulley, sleeve, housing and
sealing lip must be free of oil.
NOTE: Each new oil seal is supplied with a
plastic assembly sleeve.
Install the oil seal to the crankshaft pulley.
1. Install the plastic sleeve to the crankshaft
pulley.
2. Install the oil seal to the crankshaft
pulley.
• Remove the plastic sleeve.
To Next Page
Loading...
