303-01B-117 Engine — 1.6L / 1.3L RoCam 303-01B-117
INSTALLATION (CONTINUED)
E6646 EN 07/2001 2002 Bantam
4. Install the transaxle right-hand flange bolts.
5. Install the bolts.
1. Transmission left-hand flange bolt
2. Starter motor bolts
6. Connect the engine wiring harness
electrical connectors.
1. Connect the generator electrical
connectors.
2. Connect the oil pressure switch electrical
connectors.
3. Connect the CKP- sensor electrical
connector.
7. Raise and support the vehicle. For
a
dditional information, refer to Section 100-
02.
8. Secure the engine and transmission
assembly with a retaining strap to the
assembly stand and position for installation
underneath the vehicle.
To Next Page
Loading...
