303-01B-118 Engine — 1.6L / 1.3L RoCam 303-01B-118
INSTALLATION (CONTINUED)
E6646 EN 07/2001 2002 Bantam
9. Lower the vehicle.
10. NOTE:
Install the nuts finger tight.
Install the engine front mounting bracket.
11. NOTE:
Install the bolts and nuts finger tight.
Install the engine rear mounting bracket.
12.
CAUTION: Brake fluid will escape.
Observe the safety regulations for the
use of brake fluid. For additional
i
nformation, refer to Section 206-00.
Connect the clutch slave cylinder hydraulic
line.
13. Remove the retaining straps from the
engine.
14. Raise and support the vehicle. For
ad
ditional information, refer to Section 100-
02.
To Next Page
Loading...
