303-01B-130 Engine — 1.6L / 1.3L RoCam 303-01B-130
SPECIFICATIONS (CONTINUED)
E6648 EN 07/2001 2002 Bantam
Pitch of chain mm 8.0
Valve timing, intake opens (1 mm lift) after TDC degree 12
Valve timing, intake closes (1 mm lift) after BDC degree 24
Valve timing, exhaust opens (1 mm lift) before BDC degree 24
Valve timing, exhaust closes (1 mm lift) before TDC degree 12
Valve lift cam intake mm 5.25
Valve lift cam exhaust mm 5.25
Camshaft bearing journal diameter mm 23.96-23.98
Camshaft bearing journal bore diameter mm 24.0-24.03
Camshaft end float mm 0.075-0.185
Torque Specifications
Description
Nm
Oil gallery plug 22
Main bearing bolts 95
Rear oil seal retainer 10
Connecting rod bolts-Stage 1 4
Connecting rod bolts-Stage 2 90 degrees
Hydraulic timing chain tensioner 40
Chain tensioner arm bolt 26
Chain guide bolt 26
Oil pump 20
Crankshaft pulley bolt 125
Oil pump screen and pickup tube retaining bolt 10
Oil pan baffle bolt 19
Oil pan retaining bolts -Stage 1 6
Oil pan retaining bolts -Stage 2 9
Oil filter adaptor 20
Crankshaft position sensor retaining bolts 10
Water pump retaining bolts 10
Water pump pulley retaining bolts 12
Flywheel retaining bolts 67
Clutch bolts 29
A/C compressor retaining bolts 25
Starter motor retaining bolts 35
Oil pressure switch 20
Oil drain plug 25
To Next Page
Loading...
