303-01B-131 Engine — 1.6L / 1.3L RoCam 303-01B-131
SPECIFICATIONS (CONTINUED)
E6648 EN 07/2001 2002 Bantam
Description
Nm
Engine lifting eye 20
Camshaft cap bolts 9
Cylinder head bolts-Stage 1 (M11 bolts) 40
Cylinder head bolts-Stage 2 (M8 bolts) 15
Cylinder head bolts-Stage 3 (M8 bolts) 45 degrees
Cylinder head bolts-Stage 4 (M11 bolts) 120 degrees
Camshaft sprocket bolt 75
Valve cover bolts 9
Camshaft position sensor retaining bolt 5
Ignition coil retaining bolts 6
Oil level indicator tube retaining bolts 20
Coolant flow control housing retaining bolts 10
Spark plugs 15
Intake manifold retaining nuts 18
Intake manifold retaining bolts 18
Exhaust manifold retaining nuts 15
Exhaust manifold heat shield upper retaining bolts 10
Exhaust manifold heat shield upper retaining nut 10
Lower heat shield retaining nuts 10
Exhaust down pipe retaining nuts 47
Engine mounting front bracket to body nuts 30
Engine mounting front bracket to cylinder head
nuts
50
Engine mounting front bracket to cylinder head
bolts
25
Engine mounting rear bracket to retaining body
bolts
30
Engine mounting rear bracket to transaxle bolts 69
Gearshift stabilizer 55
Transaxle upper flange bolt 44
Transaxle lower flange bolts 44
Transaxle left-hand flange bolt 44
Transaxle right-hand flange bolts 44
Engine roll restrictor to body retaining bolts 50
Engine roll restrictor to transaxle retaining bolts 69
Lower arm 52
To Next Page
Loading...
