303-01D-30 Engine — 1.8L Diesel - Endura DE 303-01D-30
IN-VEHICLE REPAIR (CONTINUED)
E5882 EN 09/2001 2002 Bantam
6. NOTE: The lettering on the valve shims faces
downwards.
NOTE: Installation order.
Lubricate the valve tappets and valve shims
with engine oil and fit them.
7. Turn the crankshaft a further 1 1/3 turns
until it is just before TDC.
8. Put the camshaft bearing shell lower halves
in place and coat them with engine oil.
• Fit the camshaft and turn it until the slot
in the eccentric on the camshaft is parallel
with the upper edge of the cylinder head
(with the larger semi-circle at the top).
9. Align the camshaft.
10. Put the camshaft bearing shells upper
halves in place and coat them with engine
oil.
To Next Page
Loading...
