303-01D-31 Engine — 1.8L Diesel - Endura DE 303-01D-31
IN-VEHICLE REPAIR (CONTINUED)
E5882 EN 09/2001 2002 Bantam
11. Apply sealer (SPM-4G-9112-F/G) to
bearing cap no. 1 in the areas indicated.
12. Install the camshaft.
NOTE: The bearing caps must lie flat.
• Fit camshaft bearing caps nos. 1, 3 and
5.
NOTE: Tightening sequence.
• Screw on the nuts and tighten them.
13. Fit the oil baffle.
14. Seal the parting line between the bearing
cap and the cylinder head on both sides
with a thin bead of sealer (SPM-4G9112-
F/G).
To Next Page
Loading...
