303-01D-61 Engine — 1.8L Diesel - Endura DE 303-01D-61
IN-VEHICLE REPAIR (CONTINUED)
E5883 EN 09/2001 2002 Bantam
8. Pull off the flange of the camshaft timing
pulley using a proprietary two-legged puller.
• Remove the Woodruff key.
9. Remove the cylinder head cover.
1. Detach the crankcase ventilation hoses.
2. Remove the screws.
10. Remove the oil baffle.
11. CAUTION: Slacken the nuts of the
camshaft bearing caps uniformly a
turn at a time.
Remove the camshaft.
• Take out the bearing caps, bearing
shells and camshaft and put them down in
order.
• Remove the camshaft seal.
To Next Page
Loading...
