303-01D-62 Engine — 1.8L Diesel - Endura DE 303-01D-62
IN-VEHICLE REPAIR (CONTINUED)
E5883 EN 09/2001 2002 Bantam
12. NOTE: Put down the valve tappets in order.
Remove the valve tappets and the valve
shims and check them for wear.
Installation
1. NOTE: The lettering on the valve shims faces
downwards.
NOTE: Installation order.
Coat the valve tappets and valve shims with
engine oil and fit them.
2. Lay the camshaft bearing shell lower halves
in place and coat them with engine oil.
• Fit the camshaft and turn it until the slot
in the eccentric on the camshaft is parallel
with the upper edge of the cylinder head
(with the larger semi-circle at the top).
3. Align the camshaft.
To Next Page
Loading...
