303-01D-70 Engine — 1.8L Diesel - Endura DE 303-01D-70
IN-VEHICLE REPAIR
E5970 EN 09/2001 2002 Bantam
Cylinder Head (21 163 0)
Special Tool(s)
Timing pin, crankshaft TDC
position
21-104
Socket, cylinder head bolts
21-164
Angle gauge, bolt tightening
21-540
Special Tool(s)
Timing pin, camshaft pulley
23-019
Remover/installer, cooling
hose clamp
24-003
Material
Specification
Coolant L405F
Sealer SPM-4G-9112-F/G
Valve stem installation
sleeves
Removal
1. General Remarks.
• This operation was carried out on an
engine with a mechanical timing belt
tensioner.
• If necessary, use remover 303-03 when
removing coolant hoses and vent hoses.
For additional information,
refer to Section 303-03.
2. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
WARNING: Risk of scalding when the
engine is at operating temperature.
• Open the coolant recovery tank.
To Next Page
Loading...
