303-01D-78 Engine — 1.8L Diesel - Endura DE 303-01D-78
IN-VEHICLE REPAIR (CONTINUED)
E5970 EN 09/2001 2002 Bantam
6. Fit the oil baffle.
7. Seal the parting line between the bearing
cap and the cylinder head on both sides
with a thin bead of sealer (SPM-4G9112-
F/G).
8. NOTE: Clean the cylinder head cover gasket
and check it for damage. Only renew if
damaged. If it is in good condition, re-use it
several times.
NOTE: Before fitting the gasket, lightly coat it in
engine oil.
Fit the cylinder head cover.
1. Tighten the bolts.
2. Attach the crankcase ventilation hoses.
9. Attach the catalytic converter to the exhaust
manifold.
To Next Page
Loading...
