303-01D-97 Engine — 1.8L Diesel - Endura DE 303-01D-97
DISASSEMBLY
E6007 EN 09/2001 2002 Bantam
Engine (21 134 8)
Special Tool(s)
Universal flange holding
wrench
15-030A
Mounting bracket, engine
21-031B
Socket, cylinder head bolts
21-164
Special Tool(s)
Crankshaft locking tool
21-168
Puller, crankshaft timing belt
pulley
21-200
Socket, injectors
23-045
Disassembly
1. General Remarks.
• It is not possible to renew any of the
gears or the belt itself with replacement
parts from previous build years.
• If necessary, when removing coolant and
ventilation hoses, For additional
information, refer to Section 303-03.
2. Secure the engine to the assembly stand.
• Attach the mounting bracket.
• Secure the engine to the assembly
stand.
3. NOTE: Escaping oil.
Drain off the engine oil.
Detach the oil pump with the oil filter.
To Next Page
Loading...
