303-01D-121 Engine — 1.8L Diesel - Endura DE 303-01D-121
ASSEMBLY
E6005 EN 09/2001 2002 Bantam
Engine (21 134 8)
Special Tool(s)
Universal flange holding
wrench
15-030A
Aligner, clutch disk
16-067
Mounting bracket, engine
21-031B
Timing pin, crankshaft TDC
position
21-104
Centering tool, remover and
installer, oil seal
21-148A
Adjustment tool, camshaft
TDC
21-162B
Socket, cylinder head bolts
21-164
Locking tool, crankshaft
21-168
Special Tool(s)
Aligner, crankshaft rear oil
seal
21-217
Angle gauge, bolt tightening
21-540
Timing pin, injection pump
23-019
Timing pin, injection pump
23-029
Socket, injectors
23-045
Timing pin, crankshaft
position sensor (CKP sensor)
23-049
Remover/installer, cooling
hose clamp
24-003
To Next Page
Loading...
