303-01D-151 Engine — 1.8L Diesel - Endura DE 303-01D-151
INSTALLATION (CONTINUED)
E5915 EN 09/2001 2002 Bantam
6. Install the resonator.
7. Lower the engine and transmission
assembly onto the assembly table and
secure it with tensioning straps.
8. Unhook the workshop hoist and detach the
engine lifting bracket.
9. General Remarks.
• Renew circlips and self-locking nuts.
• When installing coolant and ventilation
hoses, if necessary. For additional
information, refer to Section 303-03.
10. Locate the engine and transmission
assembly in position under the vehicle.
11. Slowly lower the vehicle and guide the
engine and transmission assembly into the
engine compartment.
12. Attach the rear engine mounting.
NOTE: Do not tighten the nuts and bolts.
1. Bolts
2. Nuts
3. Fit the transmission breather.
To Next Page
Loading...
