303-01D-150 Engine — 1.8L Diesel - Endura DE 303-01D-150
INSTALLATION (CONTINUED)
E5915 EN 09/2001 2002 Bantam
2. NOTE: Make sure the guide sleeves are
correctly seated.
Align the adapter plate on the two guide
sleeves on the cylinder block.
• Fix the adapter plate with a small amount
of high-temperature grease (ESD-
M1C220-A).
3. NOTE: The transmission is centered with two
guide sleeves on the engine.
Locate the transmission in position and
tighten the rear flange bolts.
4. Tighten the front flange bolts.
5. NOTE: Fit the bracket for the cable tie for the
starter motor wiring.
Install the starter motor.
To Next Page
Loading...
