303-01D-157 Engine — 1.8L Diesel - Endura DE 303-01D-157
INSTALLATION (CONTINUED)
E5915 EN 09/2001 2002 Bantam
36. Connect the plug of the reversing light
switch (where fitted).
37. Fit the A/C compressor.
38. Fit the drive belt.
1. Lay the drive belt in place and tension it
via the bolt of the belt tensioner. For
additional information,
refer to Section 303-05.
2. Tighten the hexagon socket head bolt of
the tensioning pulley.
39. Locate the radiator and the fan plate with
the fan in position on the radiator
crossmember.
To Next Page
Loading...
