303-01D-161 Engine — 1.8L Diesel - Endura DE 303-01D-161
INSTALLATION (CONTINUED)
E5915 EN 09/2001 2002 Bantam
53. Attach the throttle cable.
1. Slide the rubber bush and clip onto the
bracket.
2. Hook the accelerator cable in place.
55. Connect the plugs and wiring:
1. Plug of the injection pump wiring loom.
2. Glow plug wiring
3. Plug of the coolant temperature gauge
sender unit.
4. Plug of ECT sensor
5. Plug of oil pressure switch
6. Plug of diesel fuel heater
56. Attach the brake servo vacuum line.
57. Connect the plug of the EGR valve.