303-03- 169 Engine — 1.8L Diesel - Endura DE 303-03-169
09/2001 2002 Bantam
Endura - DE
1st undersize 0,25 48,720 - 48,740
2nd undersize 0,50 48,470 - 48,490
Big-end bearing clearances 0,025 - 0,085
Crankshaft end float 0,1436 - 0,3688
Connecting rod end float relative to crank web 0,125 - 0,325
Max. turning torque without connecting rods and pistons 10
Connecting rods
Bore Ø - big-end 52,000 - 52,020
Bore Ø - small-end 26,012 - 26,020
Distance between connecting rod bores - Class A 129,872 - 129,948
Distance between connecting rod bores - Class B 129,932 - 130,008
Distance between connecting rod bores - Class C 129,992 - 130,068
Distance between connecting rod bores - Class D 130,052 - 130,128
Big-end bearing radial clearance 0,016 - 0,074
Pistons
Piston Ø - Class A 82,460 - 82,475
Piston Ø - Class B 82,475 - 82,490
C 82,621 - 82,639
Piston Ø - Class D 82,636 - 82,654
Piston Ø - Class E 82,961 - 82,979
Piston Ø - Class F 83,461 - 83,479
Measured at right-angles to piston pin bore
Piston clearance (initial fit) - Class A-F 0,025 - 0,055
Piston protrusion at TDC 0,500 - 0,840
Piston ring gaps (fitted) Dimensions in mm
Upper compression ring 0,30 - 0,32
Lower compression ring 0,30 - 0,32
Oil scraper ring 0,250 - 0,580
Piston ring clearance in piston groove, upper ring 0,090 - 0,122
Lower ring 0,050 - 0,082
Oil scraper ring 0,030 - 0,062
To Next Page
Loading...
