303-03- 171 Engine — 1.8L Diesel - Endura DE 303-03-171
09/2001 2002 Bantam
Endura - DE
Bearing clearances 0,020 - 0,079
Valve clearances (cold) - Inlet 0.35 ± 0,05
Valve clearances (cold) - Exhaust 0.50 ± 0.05
Adjustment shim thickness 3,000 - 4,750
in steps of 0,050
Engine Oil
Viscosity Description Specification
Recommended engine oil
15W40 API CG4 / ACEA B3 / E3
Engine Lubrication
Oil Pressure bar
Oil pressure (minimum) - at idle speed 0,75
(oil temperature approx. 80 °C) - at 2000 rev/min 1,50
Pressure relief valve opening pressure 2 - 4
Oil pump, max. inner/outer rotor clearance 0,174 mm
Lubricants, Fluids and Sealers
Ford Specification
Transmission fluid WSD-M2C200-C
Hypoid oil SQM-2C9002-AA
Power steering hydraulic fluid ESPM-2C-166-H
Ford DOT 4 brake fluid for hydraulic clutch system SAM 6C9103A
Motorcraft Super-Plus 4 coolant concentrate ESD M97B-49A
Sealer for camshaft bearing cap no. 1; sump/cylinder block SPM-4G-9112-F/G
High temperature grease for transmission input shaft, guide sleeve - clutch re-
lease bearing, pilot bearing - crankshaft and clutch splines
ESD-M1C220-A
Filling Capacities
Liters
Engine oil, initial fill with filter 5,0
with filter change 5,0
without filter change 4,5
Coolant - vehicles with manual transmission 9,3
Transmission fluid 2,8
To Next Page
Loading...
