303-04D-10 Fuel Charging and Controls — 1.8L Diesel Engine 303-04D-10
REMOVAL AND INSTALLATION (CONTINUED)
E6448 EN 09/2001 2002 Bantam
2. Install the special tools.
3. Remove the engine front mounting auxiliary
bracket.
4. Remove the engine front mounting bracket.
5. Raise and support the vehicle.
For additional information,
refer to Section 100-02.
6. Loosen the crankshaft pulley/vibration
damper retaining bolts.
7. Remove the generator. For additional
information,
refer to Section 414-02.
To Next Page
Loading...
