303-04D-19 Fuel Charging and Controls — 1.8L Diesel Engine 303-04D-19
REMOVAL AND INSTALLATION (CONTINUED)
E6448 EN 09/2001 2002 Bantam
6. Tighten the rear support bracket bolts.
7. Install the fuel injection pump pulley.
• Do not tighten the bolts at this stage.
8. Install the special tool to lock the fuel
injection pump.
9. Install a new fuel injection pump drive belt.
10. Loosen the bolt and allow the tensioner to
tension the fuel injection pump drive belt.
To Next Page
Loading...
