308-03-78 Manual Transaxle 308-03-78
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
E1165 EN 07/2001
Output Shaft
Special Tool(s)
Remover, basic tool
205-295 (15-050A)
Installer
308-045 (16-015)
Collet for 15-050 A
307-217 (17-048)
General Equipment
Puller
Press
Material
Specification
Transmission fluid BOT 130
Disassembly
CAUTION: Handle synchronizer rings
and cones carefully.
1. Detach the ball bearing and the 4th
gearwheel.
1. Detach the small snap ring.
2. Remove the snap-ring.
3. Pull off the ball bearing using a
proprietary remover.
4. Remove the 4th gearwheel and
synchronizer ring.
To Next Page
Loading...
