308-03-79 Manual Transaxle 308-03-79
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E1165 EN 07/2001
2. Detach the 3rd/4th gearwheel
1. Detach the snap-ring.
2. Remove the synchronizer clutch, the
3rd/4th gear synchronizer assembly and
the 3rd gearwheel.
3. Remove the third gear synchronizer ring.
1. Synchronizer ring
2. Third gearwheel
4. NOTE: Double synchronisation (as shown in
the illustration) is used for service repairs.
Dismantle the 3rd/4th gear synchronizer
assembly.
1. Outer synchronizer ring
2. Synchronizer cone
3. Inner synchronizer ring
4. 3rd gearwheel
To Next Page
Loading...
