204-01-17 Front Suspension 204-01-17
REMOVAL AND INSTALLATION (CONTINUED)
E1055 EN 06/2001 2002 Bantam
8.
WARNING: Install a new wheel hub-
retaining nut. Failure to follow this
instruction may result in personal
injury.
With the aid of another technician, apply the
brakes and pre load the wheel bearing.
• Install a new wheel hub-retaining nut.
9. Install the wheel and tyre. For additional
information, refer to Section 204-03.
10. Lower the vehicle.
11. Tighten the wheel hub-retaining nut.
• Using a suitable punch, stake the nut to
the halfshaft.
12. Tighten the strut and spring assembly top
mount nut.
To Next Page
Loading...
