204-01-16 Front Suspension 204-01-16
REMOVAL AND INSTALLATION (CONTINUED)
E1055 EN 06/2001 2002 Bantam
3. Install the brake disc.
4.
CAUTION: Make sure the heat shield is
installed to prevent damage to the
ball joint.
Install the heat shield.
5. Install the lower arm to the wheel knuckle.
6. Install the brake caliper and anchor plate to
the wheel knuckle.
7.
WARNING: Install a new tie-rod end-
retaining nut. Failure to follow this
instruction may result in personal
injury.
Install the tie-rod end to the wheel knuckle.
• Install a new tie-rod end-retaining nut.
To Next Page
Loading...
