308-03-85 Manual Transaxle 308-03-85
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
E1166 EN 07/2001
Differential
Special Tool(s)
Thrust pad
204-158-01 (14-038-01)
Installer, differential bearing
205-062 (15-025A)
Remover, basic tool
205-295 (15-050A)
Special Tool(s)
Collet for 15-050 A
308-197 (16-062)
General Equipment
Press
Material
Specification
Transmission fluid BOT 130
Disassembly
1. Pull the taper roller bearings off the
differential assembly.
1. Insert the thrust ring.
2. Pull off both taper roller bearings.
3. Remove the sensor ring for the vehicle
speed sensor (VSS)
To Next Page
Loading...
