308-03-101 Manual Transaxle 308-03-101
INSTALLATION (CONTINUED)
E6701 EN 07/2001
8. Using the special tools, raise the engine
and transaxle.
9. NOTE: Do not tighten the nuts and bolts.
Install the engine rear mounting bracket.
Vehicles with diesel engine
10. NOTE: Do not tighten the nuts.
Install the engine front mounting bracket.
All vehicles
11. Raise and support the vehicle. For
additional information,
refer to Section 100-
02.
12. Adjust gearshift linkage. For additional
information,
refer to Section 308-00.
13. Attach the shift rod and gearshift
mechanism stabilizer.
1. Attach the shift rod
2. Attach the shift rod stabilizer
To Next Page
Loading...
