Upgrade and Maintenance Manual RX2540 M2
7.4 2.5-inch HDD/SSD configurations . . . . . . . . . . . . . . 187
7.4.1 Mounting order for 2.5-inch HDDs/SSDs . . . . . . . . . . . . 187
7.4.1.1 HDD mounting order for 8x 2.5-inch HDD/SSD
configuration . . . . . . . . . . . . . . . . . . . . . . . . . 188
7.4.1.2 HDD mounting order for 16x 2.5-inch HDD/SSD
configuration . . . . . . . . . . . . . . . . . . . . . . . . . 189
7.4.1.3 HDD mounting order for 24x 2.5-inch HDD/SSD
configuration . . . . . . . . . . . . . . . . . . . . . . . . . 190
7.4.1.4 HDD mounting order for additional 4x PCIe SSD SFFs
accessible from the front side . . . . . . . . . . . . . . . . 191
7.4.1.5 HDD mounting order for 4x 2.5-inch SAS HDD/SSDs or
PCIe SSDs accessible from the rear side . . . . . . . . . . 192
7.4.2 Installing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . 193
7.4.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 193
7.4.2.2 Removing a 2.5-inch dummy module . . . . . . . . . . . . 194
7.4.2.3 Installing a 2.5-inch HDD/SSD module . . . . . . . . . . . 195
7.4.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 196
7.4.3 Removing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . 197
7.4.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 197
7.4.3.2 Removing a 2.5-inch HDD/SSD module . . . . . . . . . . 198
7.4.3.3 Installing a 2.5-inch dummy module . . . . . . . . . . . . . 199
7.4.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 200
7.4.4 Replacing a 2.5-inch HDD/SSD module . . . . . . . . . . . . 200
7.4.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 200
7.4.4.2 Removing a 2.5-inch HDD/SSD module . . . . . . . . . . 201
7.4.4.3 Installing a 2.5-inch HDD/SSD module . . . . . . . . . . . 201
7.4.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 201
7.5 Replacing 2.5-inch HDD/SSD SAS/SATA backplanes . . . . 201
7.5.1 Replacing the 8x 2.5-inch HDD/SSD SAS backplane 1 . . . . 201
7.5.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 201
7.5.1.2 Disconnecting cables from backplane . . . . . . . . . . . . 202
7.5.1.3 Removing the backplane . . . . . . . . . . . . . . . . . . 203
7.5.1.4 Installing the backplane . . . . . . . . . . . . . . . . . . . 204
7.5.1.5 Connecting cables to backplane 1 . . . . . . . . . . . . . 205
7.5.1.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 206
7.5.2 Replacing the 8x 2.5-inch HDD/SSD SAS backplane 2/3 . . . 207
7.5.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 207
7.5.2.2 Disconnecting cables from the backplane . . . . . . . . . . 208
7.5.2.3 Removing the backplane . . . . . . . . . . . . . . . . . . 208
7.5.2.4 Installing the backplane . . . . . . . . . . . . . . . . . . . 208
7.5.2.5 Connecting cables to backplane 2/3 . . . . . . . . . . . . 208
To Next Page
Loading...
