RX2540 M2 Upgrade and Maintenance Manual 165
Hard disk drives (HDD) and solid state drives (SSD)
Figure 61: Connecting cables to the 4x 3.5-inch HDD SAS backplane
Ê Fasten the 4x 3.5-inch HDD SAS backplane 1 with the three screws.
Ê Connect all cables to the 3.5-inch HDD SAS backplane:
– Power cable (1)
– SAS cable (2)
– If applicable OOB cable (3)
I For a complete cabling overview, please refer to section "List of used
cables" on page 559.
To Next Page
Loading...
