290 Upgrade and Maintenance Manual RX2540 M2
Expansion cards and backup units
For GPGPU M60/P100
Figure 185: Connecting the power cable
Ê Connect the connector P4 of the power cable C38 to the GPGPU M60/P100
Ê Connect the power cable:
– connector P1 to connector PWR 12V 2 on the system board
– connector P3 to connector PWR 12V 3 on the system board
– connector P5 to connector PWR 12V 4 on the system board
Ê Route the cable as shown.
To Next Page
Loading...
