Fujitsu PRIMERGY RX2540 M2

44 Upgrade and Maintenance Manual RX2540 M2
Before you start
Phillips PH1
0.4 Nm
Front panel
on rack
mounting
bracket
Cross
EJOT PT 8 mm
(silver)
C26192-Y10-
C174
Phillips PZ2
Nut 6 mm
1 Nm
Heat sink Hexagonal cross
Captive screw
(silver)
Nut 5 mm
0.6 Nm
DynamicLoM
module
D3245 and
D3255
Hexagon bolt
M3 x 5 mm (silver)
C26192-Y1-C65
Nut 8 mm
0.6 Nm
DynamicLoM
module
D3265 and
3275
Hexagon bolt
M3 x 8mm (silver)
C26192-Y1-C66
Phillips PH1
0.4 Nm
DynamicLoM
PCBA with
metal slot
bracket
Cross
M3 x 3.5 mm
CA32432-0023
Phillips
PH2 / (+) No. 2
0.4 Nm!
Front USB3.0 Cross with spring
and washer
M3 x 4.5 mm
(silver)
C26192-Y10-C67
Screw driver /
nut driver /
bit insert
torque
Screw Usage Screw type
Table 3: List of required tools and used screws