RX2540 M2 Upgrade and Maintenance Manual 589
iRMC-related status signals
I For further information please refer to section "Updating or recovering
the iRMC" on page 104.
6
AC
connected
indicator
green on
– The server is switched off and
connected to the mains
(standby mode).
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for a
specified time.
I After connecting the server to
the mains, it will take about
60 seconds until the server
will enter standby mode and
can be switched on.
off
– The server is switched off and
not connected to the mains.
– The server is switched on and
operating normally.
ID indicator
Global error
indicator
Description
blue flashing off
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
blue flashing orange flashing
An emergency flash of the iRMC
firmware is in progress.
Pos. Label Indicator Status Description
To Next Page
Loading...
