Fujitsu PRIMERGY RX2540 M2

RX2540 M2 Upgrade and Maintenance Manual 89
Basic hardware procedures
Figure 22: Installing the riser module 2 (A)
Ê Insert the riser module.
I Make sure that the riser module engages properly in the recesses
(see picture before).
Ê Carefully push down the riser module until the contacts of the riser card are
fully seated in the PCIe socket.
Figure 23: Installing the riser module 2 (B)
Ê Fasten the riser module with five screws (see circles).